Imagine slipping your favorite plasma monitor into a single module that serves as your
left, center and right channel audio with full range, large scale sound that matches the
beauty of your video! Look no further, it's here and it's real.
Plasma monitors typically offer tiny speaker columns that attach to the left and right of
the unit. The speaker drivers used in these thin columns are extremely weak and no
larger than those found in clock radios. Sometimes they don't offer speakers at all.
Our new Plasmaudio Speaker Module provides the front three channels of full impact
home theater sound while remaining only six inches deep! Your plasma monitor fits
snugly and securely into a custom sized opening such that the video screen is flush
with the left, center and right speaker arrays. And since the Plasmaudio Speaker
Module can be finished in any color, the result is a single, self contained audio/video
unit that blends with your decor.
Each Plasmaudio Speaker Module is custom built to fit 42", 50", and 75" size flat
plasma monitors. The fully loaded unit can be mounted on floor pedestals, on the wall,
in the wall or even on motorized cabinet lifts or ceiling lifts.
L/R Woofers: Two(2) 8" poly/rubber long throw drivers
Center Woofers: Four(4) 5" poly/rubber mid-bass drivers
L/R/C Tweeter: One(1) 1" wide field soft dome driver
Sensitivity: 91db avg. SPL (1W/1M)
Response: 45 Hz - 20,000 Hz (+/- 2db)
Impedance: 4 ohms
Power: 50 watts - 300 watts RMS
Weight: 200 lbs. (without Plasma monitor)
The Plasmaudio Speaker Module does not include the plasma monitor.
Note: Specifications are subject to change without notice.
left, center and right channel audio with full range, large scale sound that matches the
beauty of your video! Look no further, it's here and it's real.
Plasma monitors typically offer tiny speaker columns that attach to the left and right of
the unit. The speaker drivers used in these thin columns are extremely weak and no
larger than those found in clock radios. Sometimes they don't offer speakers at all.
Our new Plasmaudio Speaker Module provides the front three channels of full impact
home theater sound while remaining only six inches deep! Your plasma monitor fits
snugly and securely into a custom sized opening such that the video screen is flush
with the left, center and right speaker arrays. And since the Plasmaudio Speaker
Module can be finished in any color, the result is a single, self contained audio/video
unit that blends with your decor.
Each Plasmaudio Speaker Module is custom built to fit 42", 50", and 75" size flat
plasma monitors. The fully loaded unit can be mounted on floor pedestals, on the wall,
in the wall or even on motorized cabinet lifts or ceiling lifts.
L/R Woofers: Two(2) 8" poly/rubber long throw drivers
Center Woofers: Four(4) 5" poly/rubber mid-bass drivers
L/R/C Tweeter: One(1) 1" wide field soft dome driver
Sensitivity: 91db avg. SPL (1W/1M)
Response: 45 Hz - 20,000 Hz (+/- 2db)
Impedance: 4 ohms
Power: 50 watts - 300 watts RMS
Weight: 200 lbs. (without Plasma monitor)
The Plasmaudio Speaker Module does not include the plasma monitor.
Note: Specifications are subject to change without notice.
|
 |  |  |  |  |  |  |  |  |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 | |  |
 | |  |
|
| The Finest High End Import and Domestic A/V Electronics For Home, Mobile, & Marine Entertainment! |
|
|
|
Decibel Garden ® pictures and content of this website are copyrighted 2008-2010 ©
|
|
